Connect to the UofT wireless network on Android 7.x


Note: These instructions were created using a Googel Pixel running Android 7.1.1. Labels for fields and buttons, and how screens are organized may differ slightly from device to device, depending on the version of Android you are running.

  1. Go to Settings, and choose Wi-Fi.
  2. Turn Wi-Fi on if it is not already.
  3. You should now see a list of available wireless networks. Tap UofT.

    Choose Network

  4. In the next screen, choose the following settings:
    • For EAP method, choose PEAP
    • For Phase 2 authentication, choose MSCHAPV2
    • For CA certificate and chose Use system certificate
    • For Domain, type radius.wireless.utoronto.ca
    • In Identity, type your UTORid
    • In Password, type your password
    • Tap Connect

      Settings

  5. If it does not connect properly, turn Wi-Fi off and then on again.You will see the status of the connection under Wi-Fi.

    Connected

If you are still having issues connecting, please see the article about verifying your UTORid.

 

Last update:
2017-01-03 14:59
Author:
Amanda Wagner
Revision:
1.0
Average rating: 3.85 (13 Votes)

You can comment this FAQ

Most popular FAQs RSS

  1. Configure Mac Mail 10 for UTORexchange (385984 views)
  2. Wireless Access (188604 views)
  3. UTmail+ (171027 views)
  4. Student Advantage and Office 365 ProPlus (140696 views)
  5. UTORmail: Webmail (111171 views)
  6. UTORexchange (110457 views)
  7. UTORmail (101210 views)
  8. Avoiding Email Fraud (99784 views)
  9. Overview of Email Services (94608 views)
  10. Accounts and Passwords (84687 views)

Latest FAQs RSS

  1. Sending Surveys with Office 365 (2018-12-05 14:19)
  2. UTmail+ (2018-11-23 13:28)
  3. UTORlist service overview (2018-11-23 08:26)
  4. Shared Mailboxes on UTmail+ (2018-11-19 16:25)
  5. Shared Mailbox - Giving Delegate Access to Others using ... (2018-11-19 16:23)